-
INNOVATIVE TECHNOLOGYENVIRONMENTALLY FRIENDLYTrack construction machines
PRECISION AT EVERY SLEEPER THANKS TO TRACK SURVEYING
LEONHARD WEISS has been an established specialist in track surveying for many years. Using state-of-the-art measuring equipment, we ensure that the track position is recorded with the highest precision in order to guarantee safe train traffic.
Thanks to development partnerships and continuous investment in new technologies, our surveying expertise is always one step ahead of the growing requirements. Our devices enable precise measurement and documentation of the absolute and relative track position for any track geometry. The measurement data obtained forms the basis for creating an optimum track position - for example, for working with our tamping machines.
Thanks to our state-of-the-art equipment, our experienced team and our readiness for highly flexible scheduling, we minimise disruptions to train services and guarantee a predictable implementation.
Track Surveying
Pre-measuring system Trimble GEDO CE (3 complete systems)
The Trimble pre-measuring system consists of two track dynamometer wagons GEDO CE 2.0, one control unit and one Leica tachymeter. It has been optimised for pre-measuring with high capacity. The evaluation of the measuring data and the planned-actual comparison can also be carried out directly on site. Thanks to measurements using fixed reference points the absolute track position is detected. The inner track position is based on the traditional aligning method and guarantees high precision. These measuring systems are especially suitable for the use during short shutdown intervals.
Pre-measuring system Amberg Tamping IMS 1000 with GNSS (2 complete systems)
Amberg pre-measuring systems are used for the measuring of existing tracks and infrastructure. The inner geometry of the track is recorded by means of an inertial measuring system. A GNSS-based measuring system enables a recording of the absolute track position even in case of lacking, incomplete or unknown track marking. These devices stand out thanks to their very high measuring capacity. These systems are best used on tracks during a shutdown.
Measuring systems
Plasser & Theurer EM-SAT
The EM-Sat is a multifunctional rail vehicle that is particularly suitable as a carrier vehicle for on-board multi-sensor systems (MSS), such as the Trimble MX9 scanning system or georadar systems from DB Engineering & Consult. BIM data, 3D models, ground and mass analyses and, for example, as-built surveys are typical areas of application for this vehicle. The EM-SAT track survey vehicle can also be used for conventional track surveying. Thanks to its spacious cabins, the EM-Sat is also suitable for training and monitoring trips for train drivers. Translated with DeepL.com (free version)
YOUR CONTACT PERSON
We provide you with a spectrum of services that range from complete package services to rental services. Please contact us.
